Rental of Public Lighting Poles

How can you use the public lighting infrastructure?

Various elements such as stop signs, traffic signs, CDS, CCTV or Christmas decorations can be integrated on the posts. Placement of any elements is only possible following approval by the Public Lightning Administrator. From the perspective of their operation, it is necessary to distinguish whether these devices are connected to the power supply network of the public lighting.

Verification of the possibility of using the PL infrastructure must be verified and subsequently approved by the Public Lightning Administrator. The above conditions are general conditions and are subject to change in individual cases.

I want to place my equipment on a Public Lightning post. - Does this equipment require a connection to the PL electrical wiring? (YES/NO)

If so, the following basic conditions apply:

Secondary electricity consumption from the Public Lightning.

  • Attachment of equipment to be made with anticorrosive elements outside the doors of the electrical equipment of the post.
  • Connection to the distribution of public lighting to be made from a post terminal box from a separately fused outlet. If there is no vacant outlet in the post terminal block, it is necessary to replace the post terminal block with a standard type of terminal block for the respective post type with a sufficient number of outlets.
  • The routing of the power supply line from the inside of the post outwards to the installed equipment is required to be made at a sufficient height so as to prevent the occurrence of electric shock and also leakage into the mast.

If not, the following basic conditions apply:

Use of Public Lightning posts as carriers for installation of equipment without its connection to Public Lightning power distribution.

  • Attachment of equipment to be made with anticorrosive elements outside the doors of the electrical equipment of the post.
  • The windward area of all installed devices must not exceed 1.2m2 in total